Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
tutorials:advanced:bullet_world [2017/09/15 16:00] – [Geometric reasoning] gkazhoyatutorials:advanced:bullet_world [2018/04/04 09:22] (current) gkazhoya
Line 1: Line 1:
-//Tested with Cram branch: Cram4, ROS version: Indigo, Ubuntu 14.04// 
- 
 ====== Bullet world demonstration ====== ====== Bullet world demonstration ======
  
-This tutorial demonstrates how the internal belief state of the robot is represented in CRAM, how to update the world, how to perform specialized reasoning in it and how to use lightweight simulation for quick testing of plans. +This page migrated [[tutorials:intermediate:bullet_world|here]].
- +
-This tutorial assumes that you have a basic understanding of how the belief state is implemented internally. You can read about this in the [[doc:reasoning:overview|documentation entry for geometric reasoning]]. You can find the code of this tutorial on [[https://github.com/cram2/cram/tree/master/cram_tutorials/cram_bullet_world_tutorial|Github]]. +
- +
-==== Installing the projection project ==== +
- +
-As the system we will be working with will get quite complex things might not go as expected. If you get into trouble while following this tutorial feel free to consult the [[:support|Support]] page or contact the person who last edited this tutorial, you can find the username in the footer. +
- +
-If you followed the installation instructions for the full CRAM on the Installation page, you should be ready to go. +
- +
-<html><!-- +
-For the full installation of the environment you need Knowrob, CRAM reasoning and bullet physics, Roslisp and the cram_bullet_world_tutorial project. For the installation of Knowrob we recommend [[http://www.knowrob.org/installation/catkin|following the official installation guide]]. Source the knowrob workspace before you proceed.  +
- +
-All the other dependencies you can get from {{:tutorials:advanced:projections.rosinstall.txt|this rosinstall file}}. Open up a terminal and ''cd'' to the src folder of your catkin workspace. We imply that the workspace is freshly created and clean. If you want to include this project into an existing workspace you will most probably have to adjust the installation to your needs. If you don't have a .rosinstall file in the src folder use +
- +
-<code bash>$ wstool init</code> +
- +
-to create a fresh rosinstall file. (If ''wstool'' is currently not installed on your machine, I'd recommend to do it now.) Open your fresh rosinstall file and copy the contents of the above mentioned file into yours. Now you can download all the required repositories via +
-<code bash>$ wstool update</code> +
-Right now you have all the sources you need, but before you build them we want to exclude some that we don't absolutely need, since they would cause you to install even more dependencies. For that you have to create a file named ''CATKIN_IGNORE'' in the packages that we want to ignore in the build. With the terminal in the src folder you can execute the whole next block.  +
-<code bash> +
-touch cram_tutorials/cram_tutorial_ecosystem/CATKIN_IGNORE && +
-touch cram_tutorials/cram_intermediate_tutorial/CATKIN_IGNORE && +
-touch cram_common/cram_plan_library/CATKIN_IGNORE && +
-touch cram_pr2/cram_pr2_launch_files/CATKIN_IGNORE && +
-touch cram_pr2/cram_pr2_synch_projection_pms/CATKIN_IGNORE && +
-touch cram_pr2/cram_pr2_plans/CATKIN_IGNORE && +
-touch cram_pr2/pr2_manipulation_process_module/CATKIN_IGNORE && +
-touch cram_pr2/pr2_projection_process_modules/CATKIN_IGNORE && +
-touch cram_pr2/pr2_navigation_process_module/CATKIN_IGNORE && +
-touch cram_projection_demos/spatial_relations_demo/CATKIN_IGNORE +
-</code> +
-Having done that you can now build the system. +
-<code bash>$ cd .. +
-$ catkin_make</code> +
-Source the workspace when the build is ready. +
- +
---></html> +
-==== Environment setup ==== +
- +
-In order to be able to demonstrate many different features of the belief state representation we will set up the environment of the robot similar to how it is done for the real system: we will need an occupancy map for navigation, an IK solver for manipulation, a semantic map of the environment with the furniture etc.  +
- +
-First, let's set up the environment in our terminal by calling the launch file. It already brings up a ''roscore'' from within: +
-<code bash> +
-$ roslaunch cram_bullet_world_tutorial world.launch +
-</code> +
-Let's look into that launchfile. +
-<code bash> +
-$ roscd cram_bullet_world_tutorial +
-$ cat launch/world.launch +
-</code> +
-The occupancy map is for navigating the robot around furniture. The kitchens URDF represents it as if the kitchen were an actual robot whose state can change. Its joint states indicate specific points in the kitchen, which change if we, for example, open a drawer. Mainly, the joint states are for visualisation of important places of the kitchen in rviz (see the picture in section ''Objects in the world''). The semantic map is used to reason about places in the kitchen using location designators, that we talk about in the chapter ''Abstract entity descriptions''.  +
-To check if the kitchen URDF was uploaded to the ROS parameter server we can execute the following: +
-<code bash> +
-$ rosparam get /kitchen_description | awk 'NR == 5' +
-</code> +
- +
-Besides all the kitchen information also the PR2 URDF is loaded: +
-<code bash> +
-$ rosparam get /robot_description | awk 'NR == 5' # read the fifth line of the URDF +
-</code> +
-To simulate simple grasping tasks with the PR2 robot in the bullet-world we need an inverse kinematics solver for the arms. In the launch file those are the ''pr2_arm_kinematics'' package nodes.  +
- +
-If you retrieve data from the ''rosparam get'' commands, we can get going. +
- +
-====REPL setup==== +
- +
-Now, let's load the package in the REPL: +
-<code lisp> +
-CL-USER> (ros-load:load-system "cram_bullet_world_tutorial" :cram-bullet-world-tutorial) +
-CL-USER> (in-package :cram-bullet-world-tutorial) +
-</code> +
- +
-As we will be talking to the ROS master, let's first start a node: +
-<code lisp> +
-BTW-TUT> (roslisp:start-ros-node "bullet_world") +
-</code> +
- +
-First, let's do all the initializations: +
-<html><!-- BTW-TUT> (cram-pr2-pick-place-plans::reset-beliefstate) ;Removes all objects held by the grippers from belief state. --></html> +
-<code lisp>  +
-BTW-TUT> (cram-occupancy-grid-costmap::init-occupancy-grid-costmap) ; Inits the occupancy map for navigation. +
-BTW-TUT> (cram-bullet-reasoning-belief-state::ros-time-init) ; Resets the simulated time. +
-BTW-TUT> (cram-location-costmap::location-costmap-vis-init) ; Inits publishing of markers in RViz. +
-BTW-TUT> (cram-tf::init-tf) ; Inits the TF listener object. +
-</code> +
- +
-The functions above initialize and clean up the environment of the REPL. +
-Currently, we call those functions per hand for educational purposes. +
-However, there exists a function that does the initialization automatically and spawns the completely set up visualization window. It will be described later. +
- +
-The way CRAM is designed is that the belief state (the Bullet world) is only updated through Prolog queries, as we consider the belief state to be "robot knowledge" that we can query and that can get things asserted to it, and we try to manipulate the knowledge only through Prolog and not through Lisp directly. To learn more about using Prolog in CRAM you can quickly go through the [[:tutorials:beginner:cram_prolog|Prolog tutorial]]+
- +
-A new Bullet world instance is created when we load the ''cram-bullet-reasoning'' ASDF system (which is the dependency of our tutorial package). It is stored in the ''*current-bullet-world*'' variable, which we can access through the following Prolog query: +
- +
-<code lisp> +
-BTW-TUT> (prolog:prolog '(btr:bullet-world ?world)) +
-</code> +
- +
-==== Bullet world initialization ==== +
- +
-To be able to see what is going on in the belief state and to ease the debugging process we visualize the current world instance with OpenGL: +
-<code lisp> +
-BTW-TUT> (prolog:prolog '(and (btr:bullet-world ?world) +
-                              (btr:debug-window ?world))) +
-</code> +
-Please note, that the visualization window does not necessarily need to be open when the robot is operating and using its belief state, in fact, it should be closed to save processing power. +
- +
-The "bullet visualization" window that appears should be empty at the moment. Let's spawn some objects. +
- +
-The first thing we need is the floor plane: +
-<code lisp> +
-BTW-TUT> (prolog:prolog '(and (btr:bullet-world ?world) +
-                              (assert (btr:object ?world :static-plane :floor ((0 0 0) (0 0 0 1)) +
-                                                  :normal (0 0 1) :constant 0)))) +
-</code> +
-This ''assert'' query must not be confused with the Common Lisp test function ''assert''. To show you the origin of this ''assert'' query you can look up its definition. Since it is not a function but a Prolog fact you must search with ''rgrep'' in the ''cram_3d_world/cram_bullet_reasoning'' directory: +
-<code lisp> +
-BTW-TUT> Alt-x +
-rgrep RET +
-(<- (assert RET +
-*.lisp RET +
-/path/to/your/workspace/src/cram_3d_world/cram_bullet_reasoning/src/ RET +
-</code> +
-There are quite a few definitions here, serving various queries. All of them have in common, that they **change** something in the world. The one we are reaching by the previous call is this one, located in ''world-facts.lisp'': +
-<code lisp> +
-(<- (assert (object ?world ?object-type ?name ?pose . ?args)) +
-  (assert ?world (object ?object-type ?name ?pose . ?args))) +
-</code> +
- +
-In the assert query, the '':static-plane'' is the type of the object we're spawning (it can be '':static-plane'', '':sphere'', '':box'', '':mesh'', '':urdf'' etc.), '':floor'' is the name of the object, ''( (0 0 0) (0 0 0 1) )'' is the coordinate. +
- +
-Via the launch file at the beginning of this tutorial the robot URDF representation has been uploaded to the ROS parameter server under the name ''robot_description''. Let's load it into the world: +
-<code lisp> +
-BTW-TUT> (let ((robot-urdf +
-                   (cl-urdf:parse-urdf +
-                    (roslisp:get-param "robot_description")))) +
-             (prolog:prolog +
-              `(and (btr:bullet-world ?world) +
-                    (cram-robot-interfaces:robot ?robot) +
-                    (assert (btr:object ?world :urdf ?robot ((0 0 0) (0 0 0 1)) :urdf ,robot-urdf)) +
-                    (cram-robot-interfaces:robot-arms-parking-joint-states ?robot ?joint-states) +
-                    (assert (btr:joint-state ?world ?robot ?joint-states)) +
-                    (assert (btr:joint-state ?world ?robot (("torso_lift_joint" 0.15d0))))))) +
-</code> +
- +
-The line ''(roslisp:get-param "robot_description")'' gets the URDF description of the robot as a string. +
-''(cl-urdf:parse-urdf ...)'' then parses this string into a ''cl-urdf:robot'' object. +
-''(cram-robot-interfaces:robot ?robot)'' predicate reads the name of the robot that was specified in a robot description Lisp package. For the PR2 it is the ''cram_pr2_description'' package, which defines the robot name as ''pr2'', so ''?robot'' gets bound to ''pr2''+
-This line: +
-<code lisp> +
-(assert (btr:object ?world :urdf ?robot ((0 0 0) (0 0 0 1)) :urdf ,robot-urdf)) +
-</code>  +
-spawns the robot. +
-Keep in mind, that spawning a robot in the world creates a new object. The first '':urdf'' defines the type of the created object, while the second is used as a keyword to provide the objects urdf. +
-Then we read out the hard-coded values for robot arm parking states, where the arms are not in the way, and assert those joint states to our PR2 object of the Bullet world. +
- +
-Finally, let's spawn the kitchen environment (it will take some time as we query KnowRob for the semantic environment map): +
-<code lisp> +
-BTW-TUT> (let ((kitchen-urdf  +
-                 (cl-urdf:parse-urdf  +
-                  (roslisp:get-param "kitchen_description")))) +
-             (prolog:prolog +
-              `(and (btr:bullet-world ?world) +
-                    (assert (btr:object ?world :semantic-map :kitchen ((0 0 0) (0 0 0 1))  +
-                                        :urdf ,kitchen-urdf))))) +
-</code> +
-In the visualization window you can now see the kitchen loaded from the URDF with the semantic map information attached to it. If you want to have only a visualization of the semantic map without using the URDF, you just need to skip passing the URDF parameter: ''(assert (btr:object ?world :semantic-map my-no-urdf-kitchen ( (0 0 0) (0 0 0 1)))'', but as having two representations of the semantic map at the same time in the world can lead to undefined behavior and we would have to clean the world and build it up again, let's just stick to the semantic map with coupled URDF. +
- +
-You can see the semantic map in rviz as well. Open up a terminal and type ''"rosrun rviz rviz"'' or just ''"rviz"''. Tweak your setting as shown in the image below. +
- +
-{{:tutorials:advanced:bullet_world_rviz_iai_kitchen.png?800|}} +
- +
-If there are parameters missing (left box) you can add them using the 'Add' button below. Take the robot model of the kitchen for example: +
- +
-{{:tutorials:advanced:bullet_world_rviz_robot_model.png?800|}} +
- +
-To see the URDF of the kitchen in RViz you need its description name 'kitchen_description' and the TF prefix 'iai_kitchen'. In the launchfile 'world.launch' you can see, that the name of the kitchen URDF is remapped from 'robot_description' (the default) to 'kitchen_description', which is the name you need in your RViz configuration. When you open the robot model parameter, you have two checkboxes for 'Visual Enabled' and 'Collision Enabled'. The first shows a detailed mesh of each component in the kitchen, the latter shows the collision objects, which are by far less detailed. We use collision objects when navigating the PR2, since the calculation of potential collisions would be very expensive when using visual meshes. +
- +
-When you are ready with the robot model, look at the 'TF' visualization in RViz. Like the robot model it tells you if any poses can't be resolved, e.g. when their parent link is not published in TF. Open up the 'Tree' parameter of 'TF' (left panel of RViz). This is a tree representing all the TF poses with their respective parents and children. If you change the pose of a frame, all of its children will change poses as well.  +
- +
-As you can see, this environment visualizes all the TF poses we can use in our tutorial. Get back to the debug window (Bullet visualization window) to see the actual meshes of the objects. The debug window only shows the collision meshes, not the detailed visuals, since we want to keep the bullet world fast and lightweight and concentrate on collisions not visuals. +
- +
-The environment is now initialized. For convenience, there exists a function that will execute all of the above in one call. +
-If you call it now it will reinitialize everything, which is also fine: +
- +
-<code lisp> +
-BTW-TUT> (roslisp-utilities:startup-ros) +
-</code> +
- +
-This starts a ROS node and executes the ROS initialization functions, which are registered in CRAM through ''roslisp-utilities:register-ros-init-function''. You can see which functions are registered by executing the following: +
-<code lisp> +
-BTW-TUT> (alexandria:hash-table-keys roslisp-utilities::*ros-init-functions*) +
-</code> +
-You should find all of the functions that we manually called above and one additional, the ''(init-projection)'' function, which initializes the Bullet world with the robot and the kitchen environment. +
- +
- +
-==== Manipulating the kitchen ==== +
- +
-Make sure you have spawned your kitchen from urdf, not the semantic map. Check the section above for spawning the kitchen. Let us inspect the kitchen now: +
- +
-<code lisp> +
-BTW-TUT> (btr:object btr:*current-bullet-world* :kitchen) +
-</code> +
- +
-If needed, change the name of ':kitchen' to the name you used when spawning the kitchen. This call should give you a robot-object into the REPL. Inspect it by right-clicking on the ''urdf-semantic-map-object'' and choosing ''Inspect''. You can look into all its joints and states, how they are linked and in what state they are (press ''L'' to go up in the inspector). Now we are about to change one of those joints, causing the kitchen to open the door of the fridge. +
- +
-<code lisp> +
-BTW-TUT> +
-(btr:set-robot-state-from-joints +
- '(("iai_fridge_door_joint"  0.3d0)) +
- (btr:object btr:*current-bullet-world* 'my-kitchen)) +
-</code> +
- +
-If you did everything right, the fridge door should now be slightly open. Check the other joints and change them as you wish. Watch their limits though.  +
- +
-==== Spawn and change objects in the world ==== +
- +
-From this point on let us use the fast initialization function to start the bullet-world: +
- +
-<code lisp> +
-BTW-TUT> (roslisp-utilities:startup-ros) +
-</code> +
- +
- +
-Now let us spawn some household objects: +
-<code lisp> +
-BTW-TUT>  +
-(prolog:prolog '(and (btr:bullet-world ?world) +
-                     (assert (btr:object ?world :mesh mug-1 ((0 0 2) (0 0 0 1)) +
-                                         :mass 0.2 :color (1 0 0) :mesh :mug)))) +
-</code> +
-There appears a mug above the robot's head. We can also move objects: +
- +
-<code lisp> +
-BTW-TUT> (prolog:prolog '(and (btr:bullet-world ?world) +
-                              (assert (btr:object-pose ?world mug-1 ((-1 1 1) (0 0 0 1)))))) +
-</code> +
-Now the mug is above the kitchen island table. +
- +
-To get the instance of the spawned Bullet object there is a function ''btr:object'': +
-<code lisp> +
-BTW-TUT> (btr:object btr:*current-bullet-world* 'mug-1) +
-</code> +
-We can get the pose of that object through the function ''btr:pose'': +
-<code lisp> +
-BTW-TUT> (btr:pose (btr:object btr:*current-bullet-world* 'mug-1)) +
-#<CL-TRANSFORMS:POSE  +
-   #<3D-VECTOR (-1.0d0 1.0d0 1.0d0)> +
-   #<QUATERNION (0.0d0 0.0d0 0.0d0 1.0d0)>> +
-</code> +
- +
-==== Geometric reasoning ==== +
- +
-Our mug is floating in the air. The belief state world in CRAM is static, in order to apply the physics to it we use the Bullet physics engine to simulate the world for a certain amount of time. +
-<code lisp> +
-BTW-TUT> (prolog:prolog '(and (btr:bullet-world ?world) +
-                              (btr:simulate ?world 10))) +
-</code> +
-This simulates the world for 1 second and the mug falls onto the table. +
- +
-We can also ask if the scene is stable or, if we simulate the world for longer time, would objects change positions: +
-<code lisp> +
-BTW-TUT> (prolog:prolog '(and (btr:bullet-world ?world) +
-                              (btr:stable ?world))) +
-(((?WORLD . ...))) +
-</code> +
-This copies our current world and simulates it for a certain amount of time and compares the poses of objects before and after +
-simulation. If the result we got is ''(NIL)'' or anything else except ''NIL'' then the mug is stably standing on the table. +
- +
-Now, let's ask if the mug is currently visible for the robot: +
-<code lisp> +
-BTW-TUT> (prolog:prolog '(and (btr:bullet-world ?world) +
-                              (cram-robot-interfaces:robot ?robot) +
-                              (btr:visible ?world ?robot mug-1))) +
-NIL +
-</code> +
- +
-Let's move PR2 such that the cup is in its visibility range: +
-<code lisp> +
-BTW-TUT> (prolog:prolog '(and (btr:bullet-world ?world) +
-                              (assert (btr:object-pose ?world cram-pr2-description:pr2 +
-                                                       ((0.5 1 0) (0 0 1 )))))) +
-</code> +
-and ask the visibility query again: instead of typing, put the cursor where you would type and press ''Ctrl-Up''. This will find previously executed commands. +
- +
-==== Abstract entity descriptions ==== +
- +
-Now let's generate a distribution of locations from which the robot would be able to see the mug. For that we create an abstract location description that we call a //designator//. The abstract description gets grounded into specific geometric coordinates with the ''reference'' function.  +
-<code lisp> +
-BTW-TUT> (let* ((mug-pose (btr:pose (btr:object btr:*current-bullet-world* 'mug-1))) +
-                  (mug-pose-stamped (cl-transforms-stamped:pose->pose-stamped "map" 0 mug-pose)) +
-                  (mug-pose-designator (desig:make-designator :location `((:pose ,mug-pose-stamped)))) +
-                  (to-see-designator (desig:make-designator :location `((:to :see) +
-                                                                        (:location ,mug-pose-designator))))) +
-             (desig:reference to-see-designator)) +
-#<CL-TRANSFORMS-STAMPED:POSE-STAMPED  +
-   FRAME-ID: "map", STAMP: 0.0 +
-   #<3D-VECTOR (-0.2800002098083496d0 1.6999998092651367d0 0.0d0)> +
-   #<QUATERNION (0.0d0 0.0d0 -0.9338500185757329d0 0.3576648470371437d0)>> +
-</code> +
- +
-We create two symbolic descriptions: one is for the pose that we want to perceive, which we parse to a pose-stamped, and the other one is a pose for the robot from where it would be able to see the mug. +
- +
-We can also completely abstract away from geometric poses (we used the ''mug-pose'' variable which was a quantitative value) by describing the mug as an object standing on the table called the ''"kitchen_island"'' in the URDF. This will be equivalent to telling the robot: "go stand in a position such that you would be able to perceive a mug standing on the kitchen island table top". Please note, that we do not explicitly specify which mug we are searching for, we just say that somewhere on the table there should be a mug. +
- +
-<code lisp> +
-BTW-TUT>  +
-(let* ((on-counter (desig:make-designator :location `((:on "CounterTop"+
-                                                (:name "iai_kitchen_kitchen_island_counter_top")))) +
-       (the-object (desig:make-designator :object `((:type :mug) +
-                                              (:at ,on-counter)))) +
-       (pos-to-see (desig:make-designator :location `((:to :see) +
-                                                (:object ,the-object))))) +
-    (desig:reference pos-to-see)) +
-#<CL-TRANSFORMS-STAMPED:POSE-STAMPED  +
-   FRAME-ID: "map", STAMP: 0.0 +
-   #<3D-VECTOR (-0.07000017166137695d0 1.8199996948242188d0 0.0d0)> +
-   #<QUATERNION (0.0d0 0.0d0 -0.9072884056004601d0 0.42050891674609586d0)>> +
-</code> +
- +
-Here, as we didn't specifically say which pose we are trying to perceive the robot randomly samples one pose from all the poses on the kitchen island table and generates a distribution to perceive that pose, i.e., it looks in the general direction of the table. If you look at the debug window now you can see a gaussian area near the table. We can use that pose to move the robot there. +
- +
-<code lisp> +
-BTW-TUT> (btr-utils:move-robot *) +
-</code> +
-{{:tutorials:advanced:bullet_move_pr2.png?800|}} +
- +
-==== Grasp objects ==== +
- +
-We need a clean environment for this, so restart the demo with +
-<code lisp> +
-BTW-TUT> (roslisp-utilities:startup-ros) +
-</code> +
-Now we need an object to grasp. For that we will use our own mesh of a bottle loaded from resources.  +
-<code lisp> +
-BTW-TUT> (add-objects-to-mesh-list) +
-</code> +
-Then we spawn an object of type bottle and move it onto the table. +
-<code lisp> +
-BTW-TUT> (btr-utils:spawn-object :bottle-1 :bottle) +
-BTW-TUT> (btr-utils:move-object :bottle-1 (cl-transforms:make-pose +
-                                    (cl-transforms:make-3d-vector -2 -0.9 0.861667d0) +
-                                    (cl-transforms:make-identity-rotation))) +
-</code> +
-Lastly we simulate the world for 100 seconds to make sure, nothing moves unexpectedly on runtime. +
-<code lisp> +
-BTW-TUT> (btr:simulate btr:*current-bullet-world* 100) +
-</code> +
-From now on it's okay to move the robot. Before we grasp the bottle however we have to prepare the PR2, nothing fancy, just three steps: move the arms out of sight, navigate the base in front of the bottle and look at the bottle. The point we want the base to navigate to can be hard coded and saved temporarily. +
-<code lisp> +
-BTW-TUT> (setf ?grasp-base-pose  +
-(cl-transforms-stamped:make-pose-stamped +
-   "map" +
-   0.0 +
-   (cl-transforms:make-3d-vector -1.8547d0 -0.381d0 0.0d0) +
-   (cl-transforms:axis-angle->quaternion (cl-transforms:make-3d-vector 0 0 1) (/ pi -2)))) +
-</code> +
-The same thing can be done with the point, we want to look at. +
-<code lisp> +
-BTW-TUT> (setf ?grasp-look-pose  +
-(cl-transforms-stamped:make-pose-stamped +
-   "base_footprint" +
-   0.0 +
-   (cl-transforms:make-3d-vector 0.65335d0 0.076d0 0.758d0) +
-   (cl-transforms:make-identity-rotation))) +
-</code> +
-As usual we need a top-level context to start the execution of cram plans. Besides that we also use a macro to determine, that the demo should be executed in simulation, not on the real robot. Putting that together we end up with this plan: +
-<code lisp> +
-BTW-TUT> +
-(proj:with-projection-environment pr2-proj::pr2-bullet-projection-environment +
-  (cpl:top-level  +
-    (cpl:par +
-      (pr2-pp-plans::move-pr2-arms-out-of-sight) +
-      (exe:perform (desig:a motion +
-                            (type going) +
-                            (target (desig:a location (pose ?grasp-base-pose))))) +
-      (exe:perform (desig:a motion +
-                            (type looking) +
-                            (target (desig:a location (pose ?grasp-look-pose)))))))) +
-</code> +
-We actually can execute the arm movement, navigation and head tilt in parallel, since each of them uses different joints of the robot. That's what ''cpl:par'' is for. The function ''move-pr2-arms-out-of-sight'' performs motions on the joints of both arms, which bring them into a specific position, so they don't hang around the field of view. The base navigation is achieved by the motion designator trying to reach our ''?grasp-base-pose''. Looking at our target works the same way. +
- +
-With the torso so far down we won't be able to reach for the bottle, so we need to push him up. To grasp the bottle we also need its pose in the room. Therefore we first get the estimated position of the bottle, then perceive it for a more accurate pose. With that pose we start the plan ''drive-and-pick-up-plan''. Remember, that you can jump to any definition by pressing Alt and dot (or ''Alt,.''). Look into those plans at your leisure. +
-<code lisp> +
-BTW-TUT>  +
-(proj:with-projection-environment pr2-proj::pr2-bullet-projection-environment +
-  (cpl:top-level +
-    (let* ((?bottle-desig (desig:an object +
-                                    (type bottle))) +
-           (?perceived-bottle-desig (pr2-pp-plans::perceive ?bottle-desig))) +
-      (exe:perform +
-       (desig:a motion (type moving-torso) (joint-angle 0.3))) +
-      (pr2-pp-plans::drive-and-pick-up-plan ?perceived-bottle-desig :?arm :right)))) +
-</code> +
- +
-   +
-Now the PR2 should have the bottle in his right gripper. +
-{{:tutorials:advanced:bullet_world_bottle_in_gripper.png?800|}} +
- +
-Let's take a quick look into the ''drive-and-pick-up-plan'' that caused the last movement. +
-<code lisp> +
-BTW-TUT>  +
-(defun drive-and-pick-up-plan (?object-designator &key (?arm :right)) +
-  ;; navigate to a better pose +
-  (drive-towards-object-plan ?object-designator :?arm ?arm) +
-  (cpl:par +
-    (exe:perform (desig:an action +
-                           (type looking-at) +
-                           (object ?object-designator))) +
-    (exe:perform (desig:an action +
-                           (type picking-up) +
-                           (arm ?arm) +
-                           (object ?object-designator))))) +
-</code> +
-Here he first calls a function to get the base in a position optimized for grasping with a specific arm. After that he again looks at the object and finally picks it up. To see which action designator is used for picking up the object we need a good search. Use ''"Alt,x"'', type ''rgrep'' for full-text search, hit enter, then use ''":type :picking-up"'' as search string. The code we are looking for is in ''cram_pr2/cram_pr2_pick_place_plans/src/pick-place-designators.lisp''. Here the action designator is broken down to atomic action designators, that will be resolved depending on the machine that we choose to run on, either the simulation or the real robot.  +
- +
-==== Place objects ==== +
- +
-To place things held in the gripper we first need an object attached to a gripper. Use the previous chapter ''Grasp objects'' to prepare the robot appropriately. The easiest way to place down an object is by calling this code. It will put the bottle down to its original position. +
-<code lisp> +
-BTW-TUT>  +
-(proj:with-projection-environment pr2-proj::pr2-bullet-projection-environment +
-             (cpl:top-level +
-               (exe:perform (desig:an action +
-                                      (type placing) +
-                                      (arm right))))) +
-</code> +
- +
-But if we want to place the bottle somewhere else we need to define those locations. Use hard-coded poses for now, since dynamic plans require massive failure handling, which will be discussed in a later chapter. Pick up the bottle again. +
-<code lisp> +
-BTW-TUT> +
-(proj:with-projection-environment pr2-proj::pr2-bullet-projection-environment +
-             (cpl:top-level +
-               (let* ((?bottle-desig (desig:an object +
-                                               (type bottle))) +
-                      (?perceived-bottle-desig (pr2-pp-plans::perceive ?bottle-desig))) +
-                 (pr2-pp-plans::drive-and-pick-up-plan ?perceived-bottle-desig :?arm :right)))) +
-</code> +
-Now move the robot to the other table. We use a motion designator for that, who needs a specific pose. +
-<code lisp> +
-BTW-TUT> (proj:with-projection-environment pr2-proj::pr2-bullet-projection-environment +
-             (cpl:top-level +
-               (exe:perform +
-                (let ((?pose (cl-tf:make-pose-stamped +
-                              cram-tf:*robot-base-frame* 0.0 +
-                              (cl-transforms:make-3d-vector -0.15 2.0 0) +
-                              (cl-transforms:make-quaternion 0.0d0 0.0d0 -1.0d0 0.0d0)))) +
-                  (desig:a motion (type going) (target (desig:a location (pose ?pose)))))))) +
-</code> +
-This seems like a good spot to place the bottle. Let's put it down to coordinates -0.7 2.0 0.861667. +
-<code lisp> +
-BTW-TUT> (proj:with-projection-environment pr2-proj::pr2-bullet-projection-environment +
-             (cpl:top-level +
-               (let ((?drop-pose (cl-transforms-stamped:make-pose-stamped  +
-                                  "map" 0.0  +
-                                  (cl-transforms:make-3d-vector -0.7d0 2.0d0 0.861667d0) +
-                                  (cl-transforms:make-identity-rotation)))) +
-                 (exe:perform (desig:an action +
-                                        (type placing) +
-                                        (arm right) +
-                                        (target (desig:a location (pose ?drop-pose)))))))) +
-</code> +
-With these actions you can pick up objects, move the robot and place them at specific points. The scene should now look like this: +
- +
-{{:tutorials:advanced:bullet_world_place_bottle.png?800|}} +
- +
-==== Construct plans ==== +
- +
-The goal of this chapter is to write a plan, that switches the position of two objects in the world. First we want to have a clean environment: +
-<code lisp> +
-BTW-TUT> (init-projection) +
-</code> +
-If you just started your EMACS or loaded the package don't forget to add our extra meshes from resource, otherwise you won't be able to spawn a bottle. +
-<code lisp> +
-BTW-TUT> (add-objects-to-mesh-list) +
-</code> +
-Now we need those two objects in the world. +
-<code lisp> +
-BTW-TUT> (prolog:prolog '(and (btr:bullet-world ?world) +
-              (assert (btr:object ?world :mesh bottle-1 ((-2 -0.9 0.861667d0) (0 0 0 1)) +
-                                 :mass 0.2 :color (1 0 0) :mesh :bottle)) +
-              (assert (btr:object ?world :mesh bottle-2 ((-0.65 2 0.955) (0 0 0 1)) +
-                                 :mass 0.2 :color (0 1 0) :mesh :bottle)) +
-              (btr:simulate ?world 100))) +
-</code>                       +
-To make the plan shorter we can define some parameters a prior. The *pose-meal-table* is the pose, where the pr2 should stand, when he approaches the green bottle. The other pose, *pose-meal-counter* is the base pose for the counter table, when we want to place the bottle. +
-<code lisp> +
-BTW-TUT>  +
-(defparameter *pose-bottle-1* +
-  (cl-transforms-stamped:make-pose-stamped  +
-   "map" 0.0  +
-   (cl-transforms:make-3d-vector -2 -0.9d0 0.861667d0) +
-   (cl-transforms:make-identity-rotation))) +
- +
-(defparameter *pose-bottle-2* +
-  (cl-transforms-stamped:make-pose-stamped  +
-   "map" 0.0  +
-   (cl-transforms:make-3d-vector -0.7 1.8 0.955) +
-   (cl-transforms:make-identity-rotation))) +
-    +
-(defparameter *pose-meal-table* +
-  (cl-tf:make-pose-stamped +
-   "map" 0.0 +
-   (cl-tf:make-3d-vector -0.15 1.8 0) +
-   (cl-tf:make-quaternion 0.0d0 0.0d0 -1.0d0 0.0d0))) +
- +
-(defparameter *pose-counter* +
-  (cl-transforms-stamped:make-pose-stamped +
-   "map" 0.0 +
-   (cl-transforms:make-3d-vector -2.1547d0 -0.381d0 0.0d0) +
-   (cl-transforms:axis-angle->quaternion (cl-transforms:make-3d-vector 0 0 1) (/ pi -2)))) +
-</code> +
-Now we define the whole procedure. We go to the counter and pick up the first bottle. Then go to the meal table, pick up the other bottle and place the first bottle on the same spot. After that we go back to the counter and place the second bottle. You should define each of the small steps as separate functions, so your top-level plan stays readable. +
-<code lisp> +
-(defun spawn-two-bottles () +
-  (unless (assoc :bottle btr::*mesh-files*) +
-    (add-objects-to-mesh-list)) +
-  (prolog:prolog '(and (btr:bullet-world ?world) +
-              (assert (btr:object ?world :mesh bottle-1 ((-2 -0.9 0.861667d0) (0 0 0 1)) +
-                                 :mass 0.2 :color (1 0 0) :mesh :bottle)) +
-              (assert (btr:object ?world :mesh bottle-2 ((-0.65 2 0.955) (0 0 0 1)) +
-                                 :mass 0.2 :color (0 1 0) :mesh :bottle)) +
-              (btr:simulate ?world 100)))) +
- +
-(defun move-arm-out-of-sight (&key (arm '(:left :right)))       +
-  (unless (listp arm) +
-    (setf arm (list arm))) +
-  (exe:perform +
-           (let ((?left-configuration-to-go pr2-pp-plans::*pr2-left-arm-out-of-sight-joint-positions*) +
-                 (?right-configuration-to-go pr2-pp-plans::*pr2-right-arm-out-of-sight-joint-positions*))        +
-             (desig:a motion +
-                      (type moving-joints) +
-                      (left-configuration ?left-configuration-to-go) +
-                      (right-configuration ?right-configuration-to-go))))) +
- +
-(defun navigate-to (?navigation-goal) +
-  (exe:perform (desig:a motion +
-                        (type going) +
-                        (target (desig:a location (pose ?navigation-goal)))))) +
- +
-(defun look-at (?point-of-interest) +
-  (exe:perform (desig:a motion +
-                              (type looking) +
-                              (target (desig:a location (pose ?point-of-interest)))))) +
- +
-(defun get-perceived-bottle-desig () +
-  (let* ((?bottle-desig (desig:an object +
-                                      (type bottle))) +
-             (?perceived-bottle-desig (exe:perform +
-                                         (desig:a motion +
-                                                  (type detecting) +
-                                                  (object ?bottle-desig))))) +
-    ?perceived-bottle-desig)) +
- +
-(defun pick-up (?object-designator &optional (?arm :right)) +
-  (exe:perform (desig:an action +
-                                 (type picking-up) +
-                                 (arm ?arm) +
-                                 (object ?object-designator)))) +
- +
-(defun place-down (?pose ?arm) +
-  (exe:perform (desig:an action +
-                   (type placing) +
-                   (arm ?arm) +
-                   (target (desig:a location (pose ?pose)))))) +
- +
-(defun move-to-reach (?object-designator &optional (arm :right)) +
-  (pr2-pp-plans::drive-towards-object-plan ?object-designator :?arm arm)) +
-</code> +
-Here we go. Now we can use those functions to write down the top-level plan. +
-<code lisp>   +
-BTW-TUT>  +
-(defun test-switch-two-bottles () +
-  (spawn-two-bottles) +
-  (proj:with-projection-environment pr2-proj::pr2-bullet-projection-environment +
-    (cpl:top-level +
-      ;; Go to counter top and perceive bottle +
-      (let ((?navigation-goal pr2-pp-plans::*meal-table-right-base-pose*) +
-            (?ptu-goal pr2-pp-plans::*meal-table-right-base-look-pose*)) +
-        (cpl:par +
-          ;; Move torso up +
-          (exe:perform +
-           (desig:a motion (type moving-torso) (joint-angle 0.3))) +
-          (move-arm-out-of-sight) +
-          (navigate-to ?navigation-goal)) +
-        (look-at ?ptu-goal)) +
-      ;; Pick up bottle-1 with right arm. +
-      (let* ((?perceived-bottle-desig (get-perceived-bottle-desig))) +
-        (move-to-reach ?perceived-bottle-desig :right) +
-        (pick-up ?perceived-bottle-desig :right)) +
-      ;; (move-arm-out-of-sight :arm :right) +
-      ;; Move to the meal table +
-      (let ((?pose *pose-meal-table*)) +
-        (navigate-to ?pose)) +
-      ;; Pick up bottle-2 with left arm +
-      (let* ((?perceived-bottle-desig (get-perceived-bottle-desig))) +
-        (move-to-reach ?perceived-bottle-desig :left) +
-        (pick-up ?perceived-bottle-desig :left)) +
-      ;; Move left arm out of sight +
-      (move-arm-out-of-sight :arm :left) +
-      ;; Place bottle-1 on second table +
-      (let ((?drop-pose *pose-bottle-2*)) +
-        (place-down ?drop-pose :right)) +
-      ;; Move right arm out of sight +
-      (move-arm-out-of-sight :arm :right) +
-      ;; Move to the counter table  +
-      (let ((?navigation-goal *pose-counter*)) +
-         (navigate-to ?navigation-goal)) +
-      ;; Place bottle-2 on the counter +
-      (let ((?drop-pose *pose-bottle-1*)) +
-        (place-down ?drop-pose :left)) +
-      (move-arm-out-of-sight)))) +
-</code> +
-Each time you run ''test-switch-two-bottles'' you first need to reset the world with ''(init-projection)''. You can include the call at the top of the test function, but maybe you want to comment some parts out to see how the plan behaves. +
- +
-                                  +
-<html> <!-- +
-==== Light-weight simulation (projection of plans) ==== +
- +
-Now, let's use light-weight simulation to try to find our particular red mug: +
-<code lisp> +
-DEMO>  +
-(with-projection-environment pr2-bullet-projection-environment +
-  (top-level +
-    (with-designators +
-        ((on-counter :location `((:on "CounterTop"+
-                                 (:name "kitchen_island_counter_top"))) +
-         (an-object :object `((:type :mug) +
-                              (:at ,on-counter)))) +
-      (reference on-counter) +
-      (format t "Searching for the mug~%"+
-      (let ((perceived-object (perceive-object 'a an-object))) +
-        (unless (desig-equal an-object perceived-object) +
-          (equate an-object perceived-object))       +
-        an-object)))) +
-</code> +
-We execute our plan in a projection environment which substitutes the real robot controllers and sensors with their simplified models. Next, we define our object that we are searching for in a symbolic abstract way. After that, we execute the ''perceive-object'' plan from the standard CRAM plan library. We search for "**a** mug", as opposed to "**the** mug", the latter would throw an error if there would be multiple mugs found on the table. Finally, we specify that the new ''perceived-object'' that the robot found while executing the plan is the same object that we described in the designator ''an-object'', so that whenever we use the variable ''an-object'' from now on, the robot will know exactly what mug we are referring to. +
- +
- +
-To see an execution of a complete pick and place plan try the following: +
-<code lisp> +
-DEMO> (start-ros-and-bullet) +
-      (execute-demo :pancake-making) +
-</code> +
-This will execute the plan from the pancake making demo. The code can be found in the ''spatial_relations_demo'' package, in the ''pancake-making.lisp'' file.  +
---> </html> +
----- +
- +
- +
-The package ''cram_bullet_reasoning_utilities'' has a number of utility functions to make the rapid prototyping with the Bullet world faster and easier, there are functions such as ''spawn-object'', ''move-object'', ''kill-all-objects'', ''move-robot'' etc. that execute the Prolog queries with default values of parameters that are not important, e.g. default colors for objects.  +
-By pressing ''.'' while holding ''Alt'' (''Alt-.'') while the Emacs cursor is on the function name you will be redirected to the definition of the function to see what exactly it does. ''Alt-,'' brings back the previous window. Try this for ''init-projection'', for example.+